Safety Notes; Intended Use; Product Features - Würth MD 12 Traducción Del Manual De Instrucciones De Servicio Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29

Safety Notes

Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
❏ Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
❏ Do not operate the measuring tool in
explosive environments, such as in the
presence of flammable liquids, gases or
dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
❏ For technological reasons, the measuring
tool cannot ensure 100 % certainty. To rule
out hazards, safeguard yourself each time
before drilling, sawing or routing in walls,
ceilings or floors by means of other infor-
mation sources, such as building plans, pic-
tures from the construction phase, etc.
Environmental influences, such as humidity or
closeness to electrical devices, can influence the
accuracy of the measuring tool. Surface quality
and condition of the walls (e.g., moisture, metallic
building materials, conductive wallpaper, insula-
tion materials, tiles) as well as the amount, type,
size and position of the objects can lead to faulty
measuring results.

Intended Use

The measuring tool is intended for the detection of
metals (ferrous and non-ferrous metals, e.g., rebar),
joists and "live" wires/conductors in walls, ceilings
and floors.
For damage caused by usage other than intended,
the user is responsible.

Product Features

Please unfold the fold-out page with the representa-
tion of the measuring tool and leave it unfolded while
reading the operating instructions.
The numbering of the product features shown refers
to the illustration of the measuring tool on the graphic
page.
1 Illuminated ring
2 Marking hole
3 Display
4 Operating-mode indication
5 On/Off button
6 Display-illumination button
7 Audio signal button
8 Button for detecting "live" conductors/
Operating mode "Power cable"
9 Button for metal detection/Operating mode
"Metal"
10 Button for detecting wood and metal
beams/Operating mode "Drywall"
11 Contact pads
12 Sensor area
13 Type plate
14 Battery lid
15 Latch of battery lid
16 Fixture for carrying strap
17 Protective pouch
18 Carrying strap
Display Elements (see figure A)
a Switched-off audio signal indicator
b Warning-function indicator
c Indication of the object type "Non-metal object"
d Indication of the object type "Non-magnetic
metal"
e Indication of the object type "Magnetic metal"
f Indication of the object type "Live conductor"
g Temperature control indicator
h Battery indicator
i Measuring indicator
k Fine scale
l Indication "CENTER"
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5709 300 800

Tabla de contenido