Installation Requirements - Zanussi ZHC4284 Manual Del Usuario

INSTALLING THE COOKER HOOD
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a
breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air.
Incorrect installation may affect the safety of this cooker hood.

Installation Requirements

Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or
gas.
This cooker hood is designed to be fixed to any orizontal surface over a cooking area, and can be used in the
extraction (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the
hood is not installed in compliance with relevant regulations controlling this type of installation.
Unpacking
Before unpacking the cooker hood position the carton
with the arrows pointing upwards as illustrated on the
carton.
The cooker hood is made up of the following com-
ponents:
Ref. Q.ty Product Components
1
1 Hood Body, complete with: Controls, Light,
Blower, Filters
2
1 Upper Chimney
7.1 1 Telescopic frame complete with extractor,
consisting of:
7.1a 1 Upper frame
7.1b 1 Lower frame
9
1 Reducer Flange ø 150-120 mm
10 1 Ø120-125mm collar
13 1 Gasket
14 1 Hood Body Air Outlet Extension Piece
15
1 Air Outlet Connection
25
2 Pipe clamps
26 1 Fixing Part of the upper Chimney
29 1 Air outlet connection tube
Ref. Q.ty Installation Components
12c 4 Screws 2,9 x 9,5
12f 4 Screws M6 x 15
12w
2 Screws M3 x 8
21 1 Drilling template
24 2 Fixing knobs for the air outlet connection piece
Q.ty Documentation
1 Instruction Manual
GB
���
����
���
����
���
�
�
���
��
��
��
��
��
��
��
��
�
��
14