Installing Additional Components; Installing And Configuring The Mui - Dell PowerVault NX1950 Guia De Instalacion

All manuals and user guides at all-guides.com
After all the software components are installed, reboot your system.
The Dell Storage Initialization Wizard walks through the detection
and any required configuration of the storage arrays. Upon exit, the
PowerVault NX1950 Initial Configuration Tasks Wizard appears and
completes the setup of the PowerVault NX1950 Storage systems. For more
information, see "PowerVault NX1950 Initial Configuration Tasks Wizard."
NOTE:
If you have purchased the PowerVault MD3000 Premium Feature Keys,
see the PowerVault MD3000 Premium Feature Activation Card for installation
instructions and to activate the functionality.

Installing Additional Components

To install any additional components, perform the following steps:
NOTE:
Only supported options for your operating system version are available.
1 Log on as Administrator.
2 Click Start→ Control Panel, and then double-click Add or Remove
Programs.
3 Click Add/Remove Windows Components.
The Windows Components Wizard window appears.
4 Select the components that you want to install.
5 Follow the instructions on your screen to complete the installation.

Installing and Configuring the MUI

The multilanguage user interface (MUI) is pre-configured on your system
from Dell and the languages that are part of the initial configuration are
selected. The MUI is automatically installed as part of the restore process
using the Dell OpenManage Server Assistant, but the language is not
selected. To select the MUI language, launch the Dell Out-of-Box
Experience Console, select Regional Settings, and then select Language,
or see "Applying the MUI Language."
NOTE:
If you change the regional settings (including changing the language),
you must log off and log on. At logon, the language of the windows and
consoles change to the language selected. A reboot is not required.
Installation Guide 25