Steam Ironing; Shock Steam; Spraying Water - Beko SPA9130B Manual De Usuario

2 Operation

2.5 Steam ironing

WARNINGS
• When you set the appliance to
steam mode, it will not give out
steam unless you move it. The ap-
pliance will give out steam when
A
you move it. Appliance is equipped
with a movement sensor.
• Noise coming from the appliance
may increase if the water level in
the water tank decreases. In this
case, fill the tank up to the "MAX"
level.
2.6 Turbo-steam
You can use the turbo steam function when the
temperature is set to "MAX" position.
C
Use turbo steam function to obtain
higher amounts of steam and for
fast ironing on thick fabrics.
WARNING: When you set the appli-
ance to steam mode, it will not give
A
out steam unless you move it. The
appliance will give out steam when
you move it. Appliance is equipped
with a movement sensor.

2.7 Shock steam

You may use the shock steam feature in all modes.
WARNINGS
• Wait for a few seconds before
pressing the shock steam button
(6) again. If you keep pressing the
A
shock steam button (6) repeatedly,
water may come through the sole-
plate (9) together with steam.
• At the beginning of ironing, iron
may not produce shock-steam
during first couple of trials.
Steam Generator / User Manual
WARNING: Thermostat indicator
A
light (5) must go out in order to be
able to use the shock steam func-
tion.
WARNING: Never direct the steam
to people or pets.
WARNING: If the thermostat indica-
A
tor light (5) turns on during ironing,
wait for the light (5) to go out before
proceeding with the shock steam
process.

2.8 Spraying water

• Make sure that there is sufficient
C
water in the reservoir (8) before
spraying water.
• You can easily remove creases
using the water spraying feature.
2.9 Anti-dripping system
The appliance is equipped with an anti-dripping
system Iron stops vaporization automatically when
the temperature is too low in order to prevent wa-
ter coming out of the soleplate (9).
Anti-dripping system allows for ironing even the
most delicate fabrics.
2.10 Auto-Off
• If the iron is switched off automat-
ically,
• It may take around 60 seconds
C
for the soleplate (9) to reach the
previous temperature level.
• If the appliance is moved in hori-
zontal position it will be switched
on.
symbol flashes.
15 / EN