Cleaning And Care; Handling And Transportation - Beko SPA9130B Manual De Usuario

3 Cleaning and care

3.1 Cleaning
WARNINGS
• Do not use gasoline, solvent or
abrasive cleaning agents or hard
brushes to clean the appliance.
• Never put vinegar, descaling
A
agent, laundry starch, perfume or
other auxiliary products that help
ironing into the appliance.
• Do not wash your appliance under
running water or do not soak it in
water or other liquids.
• Do not use abrasive cleaning
agents to clean the soleplate (9).
3.2 Auto calc-clean
• This process allows for cleaning the calc parti-
cles that accumulate in the appliance.
• Use this feature when "CALC-CLEAN" warning
appears on the display.
• Fill the water reservoir until (8) MAX level.
• Do not move the appliance during
cleaning. In such a case, cleaning
C
procedure must be repeated.
• You may perform this procedure
by following the same steps
without waiting for the "CALC-
CLEAN" warning.
WARNINGS
• As the descaling reservoir (10)
shall heat up and as hot condens-
ing water shall be collected during
operation, do not touch the reser-
voir and the iron, and drain when
it is cooled down.
• A high amount of steam shall
come out the appliance and the
descaling reservoir during the
descaling procedure.
16
Self-cleaning function removes the
C
dirt inside the soleplate. We recom-
mend using this feature every 10-15
days.
3.3 Storage
• If you do not intend to use the appliance for a
long time, store it carefully.
• Before lifting the appliance unplug it and then let
it cool completely.
• Empty the water reservoir.
• Keep the appliance and its accessories in their
original packages.
• Store it in a cool, dry place.
• Always keep the appliance out of the reach of
children.

3.4 Handling and transportation

• During handling and transportation, carry the
appliance in its original packaging. The packag-
ing of the appliance protects it against physical
damages.
• Do not place heavy items on the appliance or on
the packaging. The appliance may get damaged.
• Dropping the appliance may render it non-oper-
ational or cause permanent damage.
For commissioning, general use and clean-
ing, please observe the instructions on pag-
es 5 - 6 and 7 of this operating manual.