Wiseup GL1700 Guia Del Usuario página 4

3.4.3. Press the Mode Button twice to make the camera enter into audio recording mode.
Both blue and red indicator lights will stay illuminated.
3.4.4. Press the Power Button once to start audio recording. The blue indicator light will
keep flashing while the red one will stay illuminated.
3.4.5. Press the Power Button once again to stop audio recording. The blue indicator light
will stop flashing and stay illuminated.
[Note]:
1). Audio Format: WAV
2). The camera can record audio for 7 hours continuously on a full charge.
3). In standby mode, you can switch to any mode by pressing the Mode Button once.
IV. Video/Image/Audio File Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a proper PC computer USB port.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "SETCLK.txt".
5.5. Write the current date and time in the"SETCLK.txt" file with the correct format:
YYYY,MM,DD,HH,MM,SS FT(For example: 2016,04,12,14,24,32 FT). F stands for 1920
x 1080P, H for 1280x720P and D for 720x480. If you want the camera to record at a lower
resolution, you can change "F" into "H" or "D" in the "SETCLK.txt" file. If you don't need
time and date stamp on the video footage, change "T" into "N" in the "SETCLK.txt" file
(For example: 2016,04,12,14,24,32 HN). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.
VI. Charging