Parts List; Troubleshooting Guide - Zuvo Water Purator Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warranty
The Zuvo Water Purator has a one (1) year limited warranty
to the original user, to be free from defect in material
and workmanship, from the date of purchase. This unit is
designed for non-commercial applications. Use in commercial
applications will void this product warranty. Supplier
liability under this warranty is strictly limited to repairing or
replacing (at supplier's option), without charge, FOB supplier's
authorized service facility, the unit or units. Both Zuvo and
supplier will not be held liable for any costs of removal,
installation, transportation to an authorized service center,
or any other charges which may arise in connection with a
warranty. Both Zuvo and supplier will not be held liable for
damage or wear to products caused by abnormal operating
conditions, accident, abuse, misuse, unauthorized alteration
or repair, or if the unit was not installed in accordance with
printed installation and operating instructions.
This warranty does not cover replacement filters.
Replacement of lamp assemblies is limited to a period of
one (1) year from the date of purchase.
Zuvo and your supplier will assume no responsibility for any
incidental or consequential damages, losses, or expenses
arising from installation, use, or any other causes. There are no
express or implied warranties, including merchantability or
fitness for a particular purpose, which extend beyond those
warranties described or referred to above.
Some jurisdictions do no allow the exclusion of incidental or
consequential damages, and some jurisdictions do not allow
limitations on how long implied warranties may last.
Therefore, the above limitations may not apply to you. This
warranty gives you specific legal rights, which vary from
jurisdiction to jurisdiction.

Troubleshooting Guide

WARNING
UNPLUG CORD FROM ELECTRICAL OUTLET BEFORE SERVICING
PROBLEM
POSSIBLE SOURCE
UNIT LEAKING
Tubing not securely
AT TUBING
connected and/or tubing
CONNECTION(S)
lock ring not secured over
tubing fitting
UNIT LEAKS AROUND
O-ring on top is not
TOP CAP AFTER FILTER
properly seated
HAS BEEN REPLACED
WATER IS FLOWING
Filter element, diverter
FROM THE UNIT AT A
screen, and/or inlet
VERY SLOW RATE
clogged
LAMP NOT LIT WHILE
• No power
UNIT IS RUNNING
• Lamp burned out
BUBBLES ARE NOT
• Filter is exhausted
VISIBLE WHILE UNIT IS
• Inlet tubing kinked
RUNNING
ALL OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED
SERVICE CENTER
All manuals and user guides at all-guides.com
AREAS TO CHECK
Verify that tubing is properly
connected and that the lock
ring is engaged
Verify O-ring is seated
• Replace filter
• Remove diverter valve from
the faucet and clean screen
• Reverse flow to unit temporarily
to remove blockage. This can
be done by temporarily reversing
inlet and outlet fittings
• Unit not plugged in properly
• Replace lamp
• Replace filter
• Reverse tubing

Parts List

To assist you in identifying components of your Zuvo Water
Purator, the parts have been numbered as follows:
1 Sealing Clamps
2 Top Cap
3 UV Lamp
4 Power Cord
5 Tubing Disconnect / Lamp Replacement Tool
6 Faucet Adapter
7 Water Faucet Diverter Valve
8 Filter (supplied inside the unit)
1
3
4
7
2
1
8
6
5
Page 3

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Zuvo Water Purator

Tabla de contenido