Dell PowerEdge FC830 Manual Del Propietário página 53

2. Press the release button on the sled handle to the open position.
3. Align the sled with the bay on the enclosure.
4. Slide the sled into the enclosure until the sled connectors are firmly engaged with the midplane connectors.
The sled handle rotates toward the enclosure as the sled slides into the enclosure.
5. Press the sled handle to closed position until the release button clicks into place.
Figure 7. Installing the sled
a. sled handle
b. sled
c. FX2/FX2s enclosure
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. Turn on the sled.
Related references
Instrucciones de seguridad
Related tasks
Before working inside your system
Después de trabajar en el interior de su equipo
on page 50
on page 51
on page 51
Instalación y extracción de componentes del sled 53