Installing The Cooling Shroud - Dell PowerEdge FC830 Manual Del Propietário

Related tasks
Before working inside your system
Removing the sled on page 51

Installing the cooling shroud

Después de trabajar en el interior de su equipo
Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
NOTE: You must remove the cooling shroud to replace a faulty cooling shroud or service other components inside the
system.
Steps
1. Align the slots on the side of the cooling shroud with the standoffs on the cooling shroud retention bar.
2. Lower the cooling shroud into the system until the slots on the cooling shroud engage with the standoffs on the cooling
shroud retention bar.
3. Slide the cooling shroud to the lock position.
4. Tighten the retention screw to secure the cooling shroud on the cooling shroud retention bar.
56 Instalación y extracción de componentes del sled
on page 51
on page 56
on page 51