4. Remove the tarjeta intermedia PCIe.
Steps
1. Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
CAUTION:
To prevent damage to the NDC, hold the card only by its edges.
2. Lift the card away from the system.
Figure 36. Removing the NDC
Next steps
Removing a PCIe mezzanine card
Installing the NDC
on page 97
Después de trabajar en el interior de su equipo
96
Instalación y extracción de componentes del sled
on page 50
on page 51
on page 80
on page 51
2. screw (2)
4. standoff (2)
6. tab projections