Maxi-Cosi Mica Pro Eco i-Size Instrucciones De Uso página 69

• Make sure you can fit no more than one finger
between the harnesses and your child (1cm). If
there is more space than 1 cm, tighten the
harness belt further.
• Make sure the headrest is adjusted to the
proper height.
WARNING:
• When using Mica Pro Eco i-Size in a
rearward-facing position it is mandatory to use
the maximum recline position for a child up
to 75 cm.
• The car seat must always be locked in the
forward facing or rearward facing position
when travelling. Do NOT travel when the car
seat is rotated to a lateral (loading) position or
to any other unlocked intermediate position.
• It is prohibited to adjust the seat position
while travelling.
• When installing the car seat, spaces between
the base of the car seat and the vehicle seat are
possible depending on the position of the
anchorage points in the vehicle.
• If you use the Mica Pro Eco i-Size on the front
seat, it is mandatory to deactivate the airbag of
the seat in question and move the passenger
seat back to a maximum (Please consult your
car manual).
ATTENTION:
• In ISOFIX use, the fitting clips for lower
anchorage to the vehicle are not sufficient.
It is essential to fix the "Support Leg" .
• The ISOFIX anchors have been developed to
obtain a safe and easy fixation of the child
safety systems inside the car. Not all cars are
equipped with these anchors although they are
standard on more recent models.
CARE
The cover, headrest cover, shoulder pads, lap
pads and the newborn inlay can be removed for
washing. If the cover needs to be replaced at
any time, only use official Maxi-Cosi covers
because it constitutes an integral part of the
restraint performance.
I
Maxi-Cosi Mica Pro Eco i-Size 40 cm-105 cm / 18 kg
EN
I
69