Urmet 1092/218 Manual Del Usuario página 36

PRIVACY – MASKING ONE OR MORE ZONES OF THE SCENE
The PRIVACY function allows to define up to eight privacy zones that mask specific areas. A privacy zone
is displayed on the monitor as a rectangle, with dimensions, colour and transparence level previously set
by the user.
REMARKS ON PRIVACY ZONE

It is suggested to use privacy zones lightly bigger than areas to be masked.

Privacy zones can only be rectangular.
Select this option to activate (ON) the privacy zones and access the following submenu.
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
COLOR
RETURN
Option
AREA SEL
AREA STATE
HEIGHT
WIDTH
LEFTH/RIGHT
TOP/BOTTOM
COLOR
RETURN
AREA SEL – AREA SELECTION
By selecting this option, 8 privacy zones are displayed. It is possible to define the number of areas to be
displayed on the screen and the size of each single area.
Press the button on the camera front to perform all desired changes.
To quit the menu, keep the button pressed for some seconds.
36
All manuals and user guides at all-guides.com
PRIVACY
AREA1
ON
■■■■■■█■■032
■■■■■█■■■032
■■■█■■■■■020
■■■■■■█■■016
■■■■█■■■■000
RET
Value
This option allows to select one of the 8 available areas
AREA1 ÷ AREA8
(see below)
This option allows to enable (ON) or disable (OFF) the
ON ÷ OFF
selected area)
000 ÷ 010 It allows to change the height of the selected area.
000 ÷ 010 It allows to change the width of the selected area.
000 ÷ 015 It allows to move the selected area horizontally.
000 ÷ 013 It allows to move the selected area vertically.
It allows to select one of the 15 available colours to fill the
000 ÷ 015
previously selected area.
It allows to quit the submenu.
RET
Description
DS1092-133