Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION/CONNECTION
Preparation
Activate the remote control battery
1
Remove protection film from the battery com-
partment.
– The remote control is now functional.
Change remote control batteries
(TYPE CR 2025)
Note:
If your device no longer responds to the
7
remote control commands, the battery may
be dead. It is imperative that dead batteries
be removed. We do not assume liability for
damage caused by leaked batteries.
Caution:
Danger of explosion if battery is incorrectly
7
replaced. Replace only with the same or
equivalent type.
1
Hold the remote control with the back side fac-
ing up.
2
Push the detent of the battery holder to the right
and remove battery holder.
3
Remove used battery and insert new battery
into the battery holder, positive pole facing up-
ward.
4
Push battery holder into the remote control until
it clicks into place.
All manuals and user guides at all-guides.com
Connecting
Connect Soundbar to the LCD TV
1
2
Connect subwoofer to the Soundbar
1
Connect external device
An external device, such as a MP3-Player for ex-
ample, can be connected to the
1
2
Connect mains cable
Check that the mains voltage indicated on the
type label (on the back of the device) corre-
sponds to the local mains voltage. If this is not the
case, please consult your specialist dealer.
1
----------------------------------------------------------
Connect a standard audio lead to the
»RCA
INPUT« jacks of the Soundbar.
– Please be aware of the left and right chan-
nels when doing so (white = left channel,
red = right channel).
Connect audio lead to the audio output jacks
of the LCD TV.
If a subwoofer is to be connected, connect
standard audio cable to the
of the Soundbar and the audio input jack of the
subwoofer.
Connect a standard audio lead to the
IN« jack of the Soundbar.
»AUX
Connect adapter cable to the external device.
Note:
The LCD TV can also be connected via the
7
»AUX
IN« jack if it is not equipped with au-
dio output jacks. In such cases please use the
headphone jack.
Plug mains cable plug into the socket
(230V ~ , 50/60 Hz).
Caution:
The Soundbar is connected to the mains via
7
the mains cable. If you want to disconnect
the Soundbar from the mains completely,
you must pull the mains plug.
Please ensure that the mains cable is freely
7
accessible during operation and is not ob-
structed by any other objects.
»SUB
OUT« jack
IN« jack.
»AUX
ENGLISH
15
Publicidad
Tabla de contenido
