Product Description; Technical Specification; Unpacking Your Unit - PestWest Chameleon QUALIS Manual Del Usuario

Chameleon Chameleon
® ®

PRODUCT DESCRIPTION

All PestWest flytraps are made using the highest quality materials. The Chameleon Qualis is of either conformal
polyester powder-coated finish over a Zintec (rust-resistant) chassis or 304 brushed stainless-steel finish. The
Chameleon Qualis utilises the PestWest full-size sticky board and is fitted with next generation Quantum X LED filament
lamps with a peak wavelength of 370nm coated with FEP shatter-resistant coating as standard.
The new Quantum X LED filament lamp is made with the familiar T5 form factor (glass tube, end caps and pins) used in
our conventional 14W T5 fluorescent Quantum lamps.
The main advantages of the Quantum X LED filament lamp technology are the extended pattern of light distribution
and the improved energy efficiency. Increased fly attraction is partly due to the LED filaments light distribution, which
is around 360° compared with only 120° typical of high power SMD (Surface Mounted Device) LEDs found in older first-
generation LED insect light traps. LED filaments are also more energy efficient than both high power SMD UV-A LEDs
and also conventional fluorescent lamps.
The Quantum X LED filament lamp consists of 18 individual LED filaments mounted on a frame and hermetically sealed
within a glass tube with a state-of -the art gas cooling system, which is far superior to traditional metal heat sinks.
Each LED filament has 24 individual LEDs which are mounted on a transparent substrate, which enables the Quantum
X LED lamp to provide light in all directions. The combination of 360° light distribution and the softer intensity of light
produced by far more LEDs (432 per lamp) gives the Quantum X superior fly catching performance.

TECHNICAL SPECIFICATION

Voltage Range
Frequency Range
Power Consumption
Ingress Protection Rating
Classification
Ambient operating temperatures
LED Driver type
Area of Coverage
Sticky board
LED Lamp type
Mounting Method
Unit Dimensions mm
Weight

UNPACKING YOUR UNIT

Each unit is carefully inspected and packed before leaving our factory. Before discarding the outer carton, examine
for obvious evidence of transport damage. Remove the unit and pay attention to the removal of all packing materials,
before installing the unit.
220-240V
50-60Hz
13W
20
Class 1
0 to +40°C
Constant Current
90-120m²
135-000226 LED 21" STICKY BOARD
130-000321 Quantum X LED 370nm 550mm T5 Shatter-
Resistant
Wall Mounted
H300 x W575 x D40
3.1 kg
ENGLISH
3
1