Residual Heat Indicator; Programming The Hob; Turning The Hob On And Off; Set The Hotplate - NEFF T4 D 3 Serie Instrucciones De Uso

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Turning the hob on and off

The hotplate is turned on and off with the main switch
To switch on: press the
#
indicator above the symbol
Ú
hotplates light up.
To switch off: press the
#
switch off. The hob is switched off. The residual heat indicator
will remain lit until the hotplates have cooled down sufficiently.
Notes
The hob switches off automatically when all the hotplates
■
remain switched off for more than 15 seconds.
The settings are memorised for 4 seconds after the hob has
■
been turned off. If the hotplate is switched back on within this
time then the previous settings will be applied.

Set the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting the power level
The hob must be switched on.
Press the ( ) symbol for the required hotplate. The _ indicator
1.
will light up.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato dumplings
Fish
* Uncovered cooking
** Uncovered
18
symbol. A beep sounds. The
and the indicator
# ‹
symbol. The indicators
‹
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Then press the + or - symbol.
2.
The basic setting appears:
+ symbol = power level
- symbol = power level

.
#
on all the
and
Ú
To change the power level: Select the hotplate and adjust the
3.
power level using the + or - symbols.
Switch off the hotplate
Press the + or - symbol until
symbol until
heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.

Cooking guidelines table

The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
œ / • light will remain on as long as
Š
...

appears or press the hotplate
‹
appears. The hotplate turns off and the residual
‹
Power level
1-1.
1-1.
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
/
œ •
Cooking time (min-
utes)
-
-
-
-
-
5-15 min
20-30 min
20-30 min
10-15 min