Childproof Lock; Activating And Deactivating The Childproof Lock; Flexible Zone; Consisting Of Two Independent Zones - NEFF T4 D 3 Serie Instrucciones De Uso

Childproof lock

The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The hob should be turned off.
To activate: press the ˜ symbol for approximately 3 seconds.
The symbol lights up for 10 seconds. The hob is locked.
‚
To deactivate: press the
˜
The lock is now deactivated.

Flexible zone

This may be used as one complete hotplate or two individual
hotplates depending on the actual cooking needs.
Operation.
It consists of several independently controlled inductors. When
the zone is working, those inductors that are not covered by
cookware are automatically turned off.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
in the upper or lower part of the flexible zone, when the
■
cookware is smaller than 13 cm (see diagram)
or in one of the two halves of the flexible zone, when the
■
cookware is larger than 13 cm (see diagram).
‘ ! FP
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
20
symbol for approximately 3 seconds.
‘  FP
Note: The childproof lock can be accidentally activated by the
presence of water spilled while cleaning, food that has spilled
over or objects resting on the
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the "Basic Settings" section.

Consisting of two independent zones

The flexible zone can be used normally as two independent
hotplates.
How to activate
See "adjusting the hotplate" section.

As one hotplate

To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
Position the cookware and, using the ( ) symbol, select one of
1.
the two hotplates from the flexible hotplate. Then select the
required power level.
Press the ï symbol. The • indicators light up. The flexible
2.
hotplate has been activated. The power level is displayed on
one or both of the indicators for the hotplates on the flexible
hotplate, depending on the location and size of the cookware.
To change the power level: Select the flexible hotplate with
3.
one of the ( ) symbols for the hotplate and change the power
level with the + or - symbols.
To add more cookware
Select the flexible hotplate then press the
indicator lights for approximately 3 seconds during the search
and detection of a new piece of cookware. The previously
selected power level is maintained. To change this, press the +
or - symbol.
To deactivate
Select the zone and press the
the flexible zone, the symbol must be pressed twice within
ï
two seconds.
symbol.
˜
symbol. The
ï
symbol twice. To deactivate
ï