Installation; Legal Requirements For Installation Of Daytime Running Lights - Gazzini 10029447 Instrucciones De Uso

cables must be routed in such a way that they cannot chafe,
and they must not kink. If necessary, use a cable sheath or a
rubber cable feed-through.

4 | Installation

4.1 | Legal requirements for installation of daytime running lights

The daytime running light must only be used on motorcycles registered under EU
law (Regulation EU 3/2014; 2009/67/EC; ECE-R53). It is not approved for vehicles
registered under German Road Traffic Licensing Regulations (StVZO) (classic
motorcycles first registered a considerable time ago).
In addition, in order to avoid dazzling other road users, daytime running lights
must switch on automatically when the "ignition" is switched on and go out
automatically when the low beam light is switched on. This does not apply when
flashing your headlight.
Stipulations for the geometric attachment position for the daytime running lights:
Frontal
Horizontal
10°
20°
(If fitted in pairs:
20° outwards, 10° inwards)
16
Vertical
10°
10°