Nokia N Serie Manual Del Usuario página 123

Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection,
press , and select Messaging
Multimedia message >
of the following:
Manual—to have the multimedia messaging center save
messages to be retrieved later. You receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message center.
Off—to ignore all incoming multimedia messages. After this
change, the device does not make any network connections
related to multimedia messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the user guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can forward incoming
fax calls to another phone number.
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
122
All manuals and user guides at all-guides.com
> Options > Settings >
Multimedia retrieval and one
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created
a WLAN Internet access point for the network on your
Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my
Nokia device?
A: The WLAN on your Nokia device will switch off when you
are not trying to connect, or are not connected to another
access point, or scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for available
networks in the background. WLAN will switch off in between
background scans.
To change the background scan settings:
1 Press , and select Tools > Settings
Wireless LAN.
2 Change the value of Show WLAN availability
stop background scans, or increase the background scan
time interval in Scan for networks.
3 To save your changes, press Back.
When Scan for networks is set to Never, the WLAN
availability icon will not be shown in the standby mode.
However, you can still manually scan for available WLAN
networks, and connect to WLAN networks as usual.
> Connection >
to Never to