Still Image Camera Settings - Nokia N Serie Manual Del Usuario

To set the image as a call image for a contact, select
contact call img..

Still image camera settings

There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
"Setup settings—adjust color and lighting," p. 48. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality—Print 5M - Large (2592x1944 resolution),
Print 3M - Medium (2048x1536 resolution),
Medium (1600 x 1200), E-mail 0.8M - Med.
resolution), or MMS 0.3M - Small
The better the image quality, the more memory the image
consumes. If you want to print the image, select
- Large, Print 3M - Medium, or Print 2M -
you want to send it through e-mail, select
Med.. To send the image through MMS, select
- Small.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
All manuals and user guides at all-guides.com
Set as Show captured
the captured image after it is taken, or
continue taking pictures immediately.
Default image
captured images.
Extended digital zoom
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want
to limit the zoom to where the selected image quality is
maintained, select Off.
Capture
take a picture.
Print 2M -
Memory in
(1024x768
(640x480 resolution).
Rotate image
rotated the right way up when you open it in the gallery.
Print 5M
Restore camera
Medium. If
values to the camera settings.
E-mail 0.8M -
MMS 0.3M
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
image—Select Yes if you want to see
No
name—Define the default name for the
(main camera only)—Select
tone—Select the tone you want to hear when you
use—Select where to store your images.
- Select whether you want the image to be
settings—Select Yes to return the default
if you want to
On to
47