Receive Data Using Bluetooth Connectivity; Remote Sim Mode - Nokia N Serie Manual Del Usuario

2 Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
Some audio enhancements connect automatically to your
device after pairing. Otherwise, scroll to the enhancement,
and select Options > Connect.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to a
device, select Options, and select from the following:
Set as authorized—Connections between your device
and this device can be made without your knowledge.
No separate acceptance or authorization is needed. Use
this status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Delete. If you want to cancel all pairings, select
Delete all.

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity,
a tone sounds, and you are asked if you want to accept
the message. If you accept,
item is placed in the Inbox
30
All manuals and user guides at all-guides.com
in the device search.
Options >
Options >
is shown, and the
folder in Messaging.
Messages received through Bluetooth connectivity are
indicated by . See "Inbox—receive messages," p. 85.

Remote SIM mode

To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. See
"Settings," p. 28. Before the mode can be activated, the
two devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit passcode,
and set the other device as authorized. See "Pair devices,"
p. 29. Activate the remote SIM mode from the other device.
When remote SIM mode is on in your device,
is displayed in the standby mode. The connection to the
wireless network is turned off, as indicated by
signal strength indicator area, and you cannot use SIM card
services or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit remote SIM mode.
Remote SIM
in the