Intended Use; Safety Informations - BGS technic 9378 Manual De Instrucciones

TOOLS
1. Crankshaft Turning Tool,
to be used as OEM 651589004000
2. Camshaft Adjusting Tool,
to be used as OEM
651589014000 / 651589094000
3. Timing Chain Guide Tool,
to be used as OEM 651589034000
4. Sprocket Feet Shaft,
to be used as OEM 651589034000
5. Camshaft Special Wrench
6. Screws for Timing Chain Guide Tool &
Sprocket Feet Shaft

INTENDED USE

This tool set includes tools to replace the timing chain. This timing chain guide tool prevents skipping
of the timing chain and allows turning of the camshaft sprockets when replacing the timing chain, a
removing of the camshaft sprockets is not required. The tool allows fast installation of the new timing
chain. The tool is suitable for Mercedes engines OM 651 series and includes: camshaft chain guide
tool, crankshaft turning tool, camshaft and camshaft locking tool.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Timing Chain Mounting Tool Set
for Mercedes Engines OM651
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9378