Set Color Options; Set The Printable Area - Rimage 2000i Guia Del Usuario

Set Color Options

This functionality allows you to toggle between color and grayscale printing, select the type of color space your labels require,
and adjust some color attributes.
1. Access Printing Preferences. Refer to page 15.
2. Select the Color tab.
3. Turn Print in Grayscale on or off.
a. In the Color Options box, select or clear the Print in Grayscale checkbox.
b. If you selected the checkbox, select the appropriate option button for your print type.
4. Move the Saturation, Brightness, and/or Color Tone sliders to the desired position to adjust color attributes.
5. If necessary, select the appropriate Color Space from the dropdown list.
6. When you have made the desired choices, select Apply.
7. Select OK. The Preferences window closes.

Set the Printable Area

This functionality allows you to adjust the non-printable area, or mask settings, for standard CD/DVD 120 mm media. The
mask settings allow you to control the outer and inner diameters so that the printed image does not overlap the disc edges. If
you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run.
1. Access Printing Preferences. Refer to page 15.
2. Select the MasknSettings tab.
3. Measure the printable area and adjust the settings.
•
If you use hub printable discs with a stacking ring:
a. In the Hub Area Settings box, select the Printing on Hub checkbox to print
on the disc hub.
Tip: Some older discs have a printable hub and a gap for the stacking
ring. If you have media like this, use the following printable areas:
Standard Area
•
Outer Diameter 118 mm
•
Inner Diameter 38 mm
Hub Area
•
Outer Diameter 35 mm
•
Inner Diameter 24 mm
b. Measure the inner diameter of the printable surface.
c. In the HubnAreanSettings field, enter the inner diameter that you measured in step b.
d. Measure the outer diameter of the printable hub area.
e. In the HubnAreanSettings field, enter the outer diameter that you measured in step d.
f. Measure the inner diameter of the standard printable area.
g. In the StandardnAreanSettings field, enter the diameter that you measured in step f.
100763_M
All manuals and user guides at all-guides.com
Operate the Rimage 2000i
Disc with Stacking Ring
17