Rimage 2000i Guia Del Usuario página 28

Rimage 2000i™ User Guide
4. Access the printer.
a. Open the printer service door to access the hex nuts at the rear of the printer.

Note: You may need to prop this door open or have someone hold the door for you.
b. With the 11/32" nut driver, loosen the hex nuts (Qty. 2) at the rear of the printer. The printer frame loosens, allowing
you to use the alignment screws (Qty. 3) to align the printer in step 6.

Note: The purpose of the hex nuts is to hold the printer securely during shipment. Tightening these nuts after
alignment is optional.
c. Close the printer service door.
5. Open the ink cartridge access door.
6. Align the printer from side to side.

Note: If the printer must be aligned front to back, continue to step 7.
28
All manuals and user guides at all-guides.com
Ink Cartridge
Access Door
Hex Nuts
Torx
Allen
Torx
100763_M