250
Spot size increases with distance from the probe tip as shown
5.3 Highest Temperature Location
Aim the thermometer to the object, then start a scan
movement across the measured area, in up and down
motion until locate the hottest point.
5.4 Field of View
Make sure that the object to be measured is larger
than the unit's spot size. As smaller the object, closer
the meter should be to it.
Diameter of Spot (mm)
25
Ø
500
Distance to Object (mm)
( Spot Diameter measured at 90% Energy )
50
Ø
1000
9
100
Ø
16
Laser
Marker