Operation; Control Keys - Minipa MT-360 Manual De Instrucciones

5. OPERATION

Trigger
Pull the trigger to turn on the meter for measuring
temperature. Releasing trigger to stop measuring
temperature and automatically hold the display read-
ing. The meter power down automatically after
around 10s.

5.1 Control Keys

SET Key
SET indicator appears when a numerical value can
be set (during setting of ε, ALM Hi and ALM Lo).
Key: The numerical value is increased.
Key: The numerical value is reduced.
If either of these numerical value keys is held down,
the numerical value changes rapidly in the appropri-
ate direction.
The data will store in nonvolatile storage region while
after completing settings. In this mode the automatic
power-off feature is disable.
Press SET key switches the mode around the cycle
ε → ALM Hi → ALM Lo → MAX → MIN → HOLD.
HOLD Releasing the trigger to stop measurement
of temperature, the HOLD indication ap-
pears, and the measured temperature is
held.
6