Kit Assembly - Metra Electronics 95-8264HG Instrucciones De Montaje

1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8" screws
supplied. (Figure A)
2. Slide the radio into the assembly and
secure with the screws supplied with
the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra.
Test the radio for proper operation.
4. Secure the radio/bracket assembly to
the vehicle using the factory hardware,
and then reassemble the dash in reverse
order of disassembly.

KIT ASSEMBLY

(Figure A)
(Figure B)
REV. 11/9/2018 INST95-8264HG
3