Mudguard - Küschal ULTRA-LIGHT Manual Del Usuario

Ultra-Light
3. Swivel the armrest assembly downwards into the
armrest holder E until the release lever hook D
engages with an audible "click".
4. Pull out the spring bolt lock B and insert the bar of
the T-armrest pad A into the holder C to the required
height.
The T-armrest pad can optionally be inserted 180°
turned.
5. Release the spring bolt lock and allow the bar of the
T-armrest pad to engage with an audible "click" in the
nearest hole.
Adjusting the height
1. Pull out the spring bolt lock B and move the armrest
pad A to the required height.
2. Release the spring bolt lock and allow it to engage
with an audible "click" in the nearest hole.
WARNING!
Risk of injury
Even if the armrests are locking, they are not
designed to carry the weight of the occupied
wheelchair.
– Never use the armrests to lift the wheelchair.
– Do not use the armrests for transportation
when carrying the wheelchair up- or
downstairs.
20

3.12 Mudguard

In order to prevent dirt from the wheels spraying upwards,
a removable mudguard can be fitted. The position of
the mudguard can be adjusted. The adjustment must be
carried out by a specialist dealer.
WARNING!
Risk of injury
The mudguards are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using
the mudguards.
– Do not use the mudguards for transportation
when carrying the wheelchair up- or
downstairs.
Removing
1. Pull the mudguard upwards out of the holder.
2. To adjust how easy or difficult it is to pull the mudguard
out of the holder, change the degree to which the
screws D are tightened.
1583566-D