Ultra-Light
Securing the wheelchair with a 4-point restraint
system
WARNING!
– Place the wheelchair with the user
forward-facing in direction of vehicle travel.
– Apply the wheelchair parking brakes.
– Activate antitipper (if installed).
The wheelchair tie-down positions where the restraint
system straps must be placed are marked with snap hook
symbols (see following figures and section 2.3 Labels and
symbols on the product, page 9 ).
1.
Using the front and rear straps of the 4-point restraint
system, secure the wheelchair to the vehicle mounted
rails. Refer to the user manual supplied with 4-point
restraint system.
44
Front side tie-down positions for belt straps:
1583566-D