Polk ATRIUM SAT300 Manual Del Usuario página 4

MOUNTING THE ATRIUM SAT300
GROUND MOUNT
To mount the SAT300 into the ground
with a security plate, you will need the
following hardware:
• SAT300 speaker
• Ground stake
• Security plate
• Rubber bumper
• (1) #10 pan head screw (for security plate)
• (1) .25" split ring lock washer
• (2) #6 pan head screws (for speaker
assembly to the stake)
Max Depth — 7.25"
Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: +1 410-358-3600)
Exploded View of SAT300
Cabinet Clamp Knob
#6 Pan
Head screw
Rubber
bumper
Ground
Bracket
stake
Security plate
(Optional)
.25" Split ring
#10 Pan
lock washer
head screw
Ground Mounting Depth
Instructions
1. Attach stake to security plate using the
#10 pan head screw and .25" split ring
lock washer.
2. Dig a hole to the diameter of the security
plate (6.5") and to a depth (max 7.25" /
min 2.25") that will stabilize and secure
the speaker once the earth has been
tamped down around the plate.
3. Place the stake/security plate assembly
in the hole and cover with dirt, tamping
down the soil with your foot as you fill in
the hole.
4. Attach the Atrium SAT300 to the stake
using the rubber bumper and the #6 pan
head screws.
5. Loosen the knob to aim the speaker.
When the speaker is aimed properly,
tighten the knob.
Aiming the Speaker
Customer Service Hours of Operation: Monday-Friday 9AM-6PM EST
Ground Mount Without Security Plate
If you choose to mount the SAT300
loudspeaker in the ground without the
security plate, be sure the ground is
compact enough to hold the speaker and
stake securely in the ground. Gently drive
the ground stake into the ground using a
rubber mallet and follow instructions from
step 4.
polkcs@polkaudio.com