Product Structure; Seal Ring - LF Highland MY-CS6004W Manual Del Usuario

PRODUCT STRUCTURE

Tips:
1. Please move the product with the handle of the cooker body;
2. Please remove the water from the housing cover with cloth.
Note
1. Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the
exhaust valve and the exhaust valve and float valve of the lid with brush and cloth at
least once a month.
2. Sealing gate: Please remove oil and dirt from the sealing gate with detergent and
brush. The remained oil and dirt in it may appear in yellowish. After washing, it may
recover to the original color as stainless steel. It is suggested to clean the sealing gate
once every 2 months.
3. Water box: After cooking, the steam may stay in the water box of the external pot as
water. Water in the box should be removed for avoiding bad odor, please clean it with
clean cloth.
Disassemble and install the block proof cover and seal ring
1. Check if the seal ring (B) and block proof
cover (H) are correctly installed in the upper
cover before use each time.
2. A fter use, please clean the seal ring (B) and
around of block proof cover (H) for avoiding
jamming the cover, keep it clean to avoid
bad odor.
1. Please do not pull the seal ring (B),
otherwise, the distorted seal ring may
influence the seal ring (B) and pressure
effect.
2. Do not use the damaged seal ring (B),
please replace it at the authorized repair
office.
Disassemble
Disassemble
and install the
block proof
cover
Disassemble
Disassemble
and install the

seal ring

6
Pull it out upwards
B
Install
Press it down to install
B
H
B
B
H
H
H