Powerbuilt 641321 Guia De Inicio Rapido página 2

For: 1980-2000 Model Honda Accord, Civic, Del Sol, CRX and Preludes
Ball Joint Removal and Installation:
This tool is designed for use on cars listed above that have press-fit type ball joints. It will help user remove
and install ball joints without the need to remove the control arm from the vehicle. Adapters are used with
940579 ball joint press.
Removal:
1. Assemble the ball joint press over the control arm.
2. Tighten the forcing screw until the removing adapter contacts the control arm. Check the alignment of all
tooling and components, and continue tightening the forcing screw until the ball joint is removed.
Installation:
1. Clean the control arm and coat the I.D. with a suitable lubricant.
2. Insert the replacement ball joint as straight as possible into the vehicle control arm.
3. Assemble the ball joint press components and tighten the forcing screw. Check the alignment of all tooling
and components, and continue tightening the forcing screw until the ball joint is firmly seated.
1