Introduction; Symbols Used In This Manual; Safety; General Safety Information - BAT Base Lite Manual Para Uso Y Mantenimiento

Use and maintenance manual
1

Introduction

This manual, together with the others attached (e.g. motor manual, remote control etc.), is an integral part of the
product and has been written for its user; it is key to the correct use and maintenance of the product.
If this manual is lost or destroyed, the user must request a new copy from the reseller, supplying them with the
main product data and the destination of the new copy.
The pages and content contained within this manual must not be removed, rewritten or modified in any way.
This manual must be kept intact in an easily accessible location until the product is disposed off.
The manufacturer reserves the right to update its products and their corresponding manuals without any obligation
to update previous products and manuals.
The Manufacturer reserves all rights concerning this manual: no reproduction shall be permitted, in whole or in
part, without its express written authorisation.

1.1 Symbols used in this manual

WARNINGS:
INFORMATION AND WARNINGS
Instructions and advice to help ensure correct use and storage of the product. Failure to follow these
instructions may compromise the product's integrity and/or strength.
CAUTION
Operator hazard! Instructions and warnings to be read and followed carefully. Failure to observe these
instructions may put people's safety at risk.
CAUTION
Read the instructions carefully before using the product.
Leggere attentamente
il Manuale
2

Safety

2.1 General safety information

• Close the product completely in the event of bad weather or snow. Danger of damage or injury.
• Assembly/installation and first use, adjustment and extraordinary maintenance must only be performed by
technicians trained and specialised for those tasks. Contact Technical Support.
•
Do not place objects on the product.
• It is forbidden for people to hang or hold themselves on the product – this would create a serious risk of injury
as well as potentially damaging the product itself.
• The manufacturer shall not be held responsible for any damage resulting from either tampering or unauthorised
modification to the product.
• The user must not perform any operation or work on the product for which they are not authorised see Cap.4
"Intended use and installation location", pag.21 and Cap.8 "Maintenance", pag.23.
•
Ensure there is nobody obstructing or excessively close to the product's moving parts when opening and
closing.
• For products which can be operated from a position where they cannot be seen, or automatically by weather
sensors, the user must adopt appropriate organisational measures to prevent operation of the product when
maintenance operations are being performed in the vicinity, for instance cleaning of windows or walls.
• The product absolves risks as per legislation EN13561: risks of a mechanical, electrical and ergonomic nature.
•
The user must inform the Reseller immediately if any faults/malfunctions should occur on safety devices or if
any other dangerous situation should occur.
• If any doubts remain, consult the reseller BEFORE using the product.
• In the event that the product is not to be used for a prolonged period of time, protect any exposed mechanical
parts.
• Removing the safety devices installed on the structure is strictly forbidden (see Cap.10 "Optional Accessories",
pag.25).
•
It can be opened and closed by pressing a switch and/or via a remote control: both of these must be located
OUT OF THE REACH OF CHILDREN.
• All maintenance and cleaning operations, and work done on the facade, must be performed with the electrical
supply disconnected.
05/09/2019 rev.04
All manuals and user guides at all-guides.com
Base Lite
19