Changing Harness Strap Slots - Graco ComfortSPORT Manual De Instrucciones

OPERATIONS and ADJUSTMENTS
5

Changing harness strap slots:

A Loosen harness straps:
Lift up lever (fig. b, pg. 25)
while pulling on shoulder straps.
B
Remove both shoulder harness strap
loops from splitter plate on back of
child restraint.
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
child restraint.
It may be necessary to remove seat pad
from top of child restraint while relocating.
26
(continued)
D Re-attach harness strap loops to splitter
plate:
• For Infants or Small Toddlers:
Put Top right strap loop on splitter
plate first, then attach Top left strap
loop (fig. h - fig. i).
NOTE: Make sure ends of straps are
behind splitter plate (fig. j).
• For Toddlers:
Put Bottom right strap loop on
splitter plate first, then attach Bottom
left strap loop (fig. k - fig. l).
NOTE:
• Make sure both strap loops are securely
attached within splitter plate hook
(fig. m).
• Make sure straps are NOT twisted and
are routed behind stand (fig. g).