Configuración De Los Parámetros Generales Del Inversor - Artesolar ARTI19M Manual De Usuario

ARTI19M
6.2.4 Configuración de los parámetros generales del inversor
Pantalla LCD Pasos de Operación
1. Settings of figures
In the main LCD interface,
press "ENT" button to enter
into the selection of "Figu-
re", press ▼ or ▲ to select.
The LCD displays daily,
monthly, yearly and gross
generating capacity.
2. Settings of System Parameter
1. In the main LCD interface,
press "ENT" button, then
press ► to enter into
"Setting".
2. Press ENT to enter into"
Communication Settings".
Press ▼ and ▲ to set the
communication address
of Wi-Fi and RS485. The
Fault address is 1.
1. In the main LCD interface,
press "ENT" button, then
press ► to enter into
"Setting".
21