Preparing For Use; Tips For Use; Use; Manually Adjustable Sections - Auping Match 333 Manual De Instrucciones

All manuals and user guides at all-guides.com
Make sure that the anchors are not
directly above a cross bar.

3.3 Preparing for use

Check that the mesh base can
move freely. Only adjust the mesh
base while it is in a horizontal
position, securely fixed to the
supporting legs, or to the supports
provided within the bed surround.
Check that the mattress is attached
to the mesh base properly.

3.4 Tips for use

A new mattress has a certain
amount of rigidity, which will
disappear within a few days.
Consequently, your mattress will not
optimally follow the contours of the
mesh base when it is initially
adjusted. We therefore recommend
that you lie down on the mattress
while adjusting the positions for the
first time.

4. Use

4.1 Manually adjustable sections

Raise back section
Pull the adjustment cord and lean
forward with the upper part of your
body. The back section will then
move up automatically. Release the
fig. 3
cord when you reach the position
you want.
Lower back section
Pull the adjustment cord and lean
backwards. The back section will
go down. Release the cord when
you reach the position you want.
If necessary, you can adjust the
power of the gas spring yourself
(see 4.2).
Foot end
The foot end has six adjustable
positions.
Carefully pull on the handle until the
desired position is reached.
To put the foot end into a lower
position you must first pull it up as
far as it will go and then lower it
again.
GB 5