HTW -CLE-11NOXUAGLP-K Manual De Usuario E Instalacion página 40

● Installation type (C32)
● Installation of the compulsory supply and exhaust pipe of the unit:
a. Upper exhaust installation mode.
Tapping screw
As shown in the image below, tighten the expander screws to secure them, hang the unit vertically
and screw it in with nuts, insert plastic plugs under it, and screw in the self-tapping screws.
Ф 110 ~ Ф 130 round
hole through wall
Supply and exhaust pipe
Self tapping screw ST4.2 × 6.5
1 mounting hole for
expander screws
3-Ф8
2 mounting holes for plastic plug
90
with self-tapping screw
12