The heat exchanger
is blocked
Water flow sensor failures
Cigarette lighter
pushbutton failures
Internal cables fall
Fan failures
Micro switch failures
Solenoid valve failures
Feedback Electrode
Failures
Discharge distance or
abnormal discharge
position
Power is cut by fault
Cold water master
valve is not open
Incorrect water
temperature setting
method
Inadequate fresh air
intake
Clogged smoke duct
If other faults are found, stop using the heater immediately and notify the professional maintenance
department to repair it. Users should not remove or repair water heaters without prior authorization,
otherwise an accident could occur.
!
Do not use faulty heaters.
WARNING
23
Contact maintenance personnel
Contact maintenance personnel
Contact maintenance personnel
Contact maintenance personnel
to properly connect loose or
downed cables
Contact maintenance personnel
Contact maintenance personnel
Contact maintenance personnel
Contact maintenance personnel
Adjust ignition needle and
contact maintenance personnel
Connect power
Fully open the water inlet master
tap
See adjustment procedure
for fresh winter-summer air
Immediately improve ventilation
to ensure adequate fresh air
intake
Reuse after removing foreign
objects from the fireplace