Festool OFK 500 Q Manual De Instrucciones Original página 11

5 Working with the machine
Always secure the workpiece in such a
manner that it cannot move while being
sawed.
Set the required milling depth and steadily guide
the machine along the edge of the workpiece,
ensuring that the guiding table and the milling
tool ball bearing are in contact with the workpiece
at all times.
6 Maintenance and care
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
Always keep the machine and the ventilation slots
clean.
All maintenance and repair work which requires
the motor casing to be opened may only be carried
out by an authorised service centre.
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at:
Use only original Festool spare parts!
EKAT
4
Order No. at:
5
3
2
1
7 Accessories, tools
For your own safety, use only original
Festool accessories and spare parts.
Festool offers the appropriate accessories, san-
ding and polishing attachments for every applica-
tion. The accessory and tool order number can be
found in the Festool catalogue or on the Internet
under " ".
8 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
11