Assembly And Operation - Hailo TopLine TL100 Instrucciones De Uso

6. Assembly and operation

After delivery and before each use examine the
condition of the ladder, the function of all parts
must be ensured.
NOTE
Caution, damage!
Always handle the ladder carefully.
Extend and collapse the ladder in a deliberate and
careful way. If a rail is bent or damaged, the ladder
can potentially be extended or collapsed only with
difficulty or not at all.
6.1 Assembly of the storage tray
Attach the multifunctional tray [J] to the ladder rail
with the enclosed Phillips screw.
6.2 Note on handling the stepladder
The ladder has two extendable sides [C-1, C-2],
which allow variable height adjustment The ladder
can now be used as a 3, 4 or 5 step stepladder.
The extendable sides [C-1, C-2] must be locked be-
fore using the ladder. There is an adjustment unit
[G] with the locking guide [H] on both guide rails.
• If the locking guide [H-1] "GREEN" is visible, the
ladder is locked and can be ascended.
• If the locking guide [H-2] "RED" is visible, the
ladder is unlocked and can be adjusted.
The extendable sides audibly click into place
WARNING
Risk of injury!
Only climb the ladder when the steps are securely
locked. The locking guide „GREEN" must be fully
visible.
6.1
6.2
en
23