Hailo TopLine TL100 Instrucciones De Uso página 24

6. Assembly and operation
6.3 Setting up the stepladder
When setting up the ladder pay attention to the
entire secured opening of both ladder parts. Avoid
incorrect placement of the ladder.
Lock the platform [F] additionally by applying
slight pressure with your hand; the platform must
rest completely and safely.
6.4 Locking positions
The ladder can be set up in 3 locking positions
(X-1, X-2, X-3).
6.5 Adjusting the height of the stepladder
WARNING
Risk of injury!
When handling the ladder, there is a risk of injury
from pinching and shearing points.
When moving the ladder, pay attention to the posi-
tion and placement of the hands!
The climbing side and the support side must be in
the same locking position on both sides. The plat-
form must be aligned horizontally to the surface on
which the ladder is being set up.
Remove all objects from the storage tray before
adjusting the extendable sides.
1. Set the release buttons [G-1] on both guide rails
of the sides [C-1] outwards and then upwards.
The locking guide [H-2] „RED" is visible. The
side is now unlocked and can be moved.
2. Pull out the sides [C-1] using the handle [I] and
push them to the desired position.
Push both release buttons [G-1] down first so
that the locking pins of the adjustment unit
[G] can engage automatically in the opening
provided.
24
6.3
6.4
6.5