Clean Track 70-2 PUMP AUTOMATIC Manual De Instrucciones página 22

MALFUNCTION
- The machine does not start
.
- The machine stops working abruptly
- There is a drop in suction
.
- Vacuum power drops abruptly
11. TROUBLE SHOOTING, MALFUNCTION CAUSES AND SOLUTIONS
- Lack of electricity
- The motor has overheated and the thermal
protection with which some models are equipped
has intervened.
- Filtration system is clogged
- Flexible hose and/or attachment is clogged
- The tank is too full
- Flexible hose and/or attachment is clogged
EN
CAUSE
- Check the on/off switch
- Check the power cord
- Check the electric socket
- Wait until the motor has cooled and then try
starting the machine
- Contact the repair and service center
- Clean or replace the filtration system
- Clean the flexible hose and the attachment
- Clean and/or empty the tank
- Check the safety float
- Clean the flexible hose and the attachment
SOLUTION