Paragraph 4 - Setting The Maximum Flow; Paragraph 5 - Setting The Alarm Relay; Paragraph 6 - Flow Rate Calibration - Oase CFS Instrucciones De Uso

Pos: 81 /Gartentechnik/KDS Anlage TEKNA/Absatz 4 @ 12\mod_1253695026504_121.doc @ 75310 @
9. Paragraph 4 – Setting the Maximum Flow
Programming
PROG
Pump Functions
-
Max flow rate Max flow rate
P100%
P100%
-
Max flow rate
F320s/m
Pos: 82 /Gartentechnik/KDS Anlage TEKNA/Absatz 5 @ 12\mod_1253695075077_121.doc @ 75337 @
10. Paragraph 5 – Setting the Alarm Relay
Programming
PROG
Pump Functions
-
Max flow rate
P100% -
Alarm Relay
N.Open
-
Pos: 83 /Gartentechnik/KDS Anlage TEKNA/Absatz 6 @ 12\mod_1253695128009_121.doc @ 75364 @
11. Paragraph 6 – Flow rate Calibration
Programming
PROG
-
-
Pump Calibration
0,23 cc/stroke
Pump Calibration
Manual
-
Pump Calibration
Automatic
-
Pos: 84 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
All manuals and user guides at all-guides.com
-
+
-
-
+
-
-
+
-
-
Pump Calibration
+
cc/stroke 0,23
Automatic Cal.
Start 100 strok.
Automatic Cal.
Strokes 100
-
Automatic Cal.
+
ml 20
Operation
This makes it possible to set the maximum flow offered by the
pump, and the programmed mode (% or frequency) is used as the
standard unit of measurement when displaying the flow. Changes
can be made by pressing the
keys to set the new value. Press
main menu
Operation
This is used to set the alarm relay in the absence of an alarm
situation, if open (default) or closed.
Changes can be made by pressing the
using the keys to set the new value. Press
to confirm and return to the main menu
Operation
The memorised cc value per strike appears in the main menu. It can
be calibrated in two different ways:
MANUAL – manually enter the cc value per strike using the
keys and confirm by pressing the
AUTOMATIC – the pump makes 100 strikes, which are started by
pressing the key. At the end of this process, enter the
quantity sucked up by the pump using the
confirm by pressing the
The entered figure will be used in flow calculations.
- GB -
key, then using the
to confirm and return to the
key, then
key
keys and
key.
31