Setting The Temperature - Qlima ECO 1700 Instrucciones De Uso

When the combustion procedure at these lower temperatures does not result in a
properly burning fire, the display will show "ALAr / FAN / ACC".
To light the fire, place "firelighters" on the bottom of the brazier. Light the fire-
lighter with a match and wait 1 minute before lighting the stove using the "stan-
dard start-up procedure" as described in section 4.2.
If this does not result in a properly burning fire, the stoves setup parameters will
need to be changed by a professional. Contact a Qlima-approved fitter.

4.4 SETTING THE TEMPERATURE

1.
2.
3.
4.
5.
4.5 CHANGING THE HEAT OUTPUT OF THE STOVE
1.
2.
3.
4.
5.
4.6 SAVE MODE
When this mode is active, the stove will automatically switch off as soon as the
room temperature - plus the set differential temperature - has been reached. The
stove will automatically switch itself off as soon as the room temperature - plus the
set differential temperature - has been reached.
4
76
Push button 1 to go to the temperature setting menu. The display will show
"set" and the desired temperature.
Press button 1 to reduce the desired temperature. The display will show set
temperature.
Press button 2 to raise the desired temperature. The display will show set
temperature.
The desired temperature has now been set. After 3 seconds, the display will
automatically return to normal operating mode.
The procedure for changing the temperature is now complete.
The desired temperature can be set anywhere between 7ºC and 40ºC.
Push button 2 once. The display will show "pot" and one of the 5 heat out-
put levels.
Push button 1 to reduce the heat output setting. The display will show the
new output setting.
Push button 2 to raise the heat output setting. The display will show the
new output setting.
Once the display has shown the new output setting, 3 seconds later the dis-
play will automatically return to normal operating mode.
The procedure for changing the heat output setting is now complete.
The Save mode can only be used when the stove is not in timer mode.