Greentouch 1801-FM Manual De Instrucciones página 7

MASTER POWER BUTTON: Press button to turn the master power on then press
again to turn the master power off. The master power can be powered on and
all the other unit functions can be off. When the power button is powered on
the ember bed(logs) will have a slight glow to act as a power indicator.
FLAME BRIGHTNESS BUTTON: Press button to scroll through 5 levels of bright-
ness, pressing a sixth time turns the flames off. When the flame is powered on,
it will start with the brightest setting (5), push the flame button one time to step
through each flame brightness. The flame levels in order are 5, 0, 1, 2, 3, 4, 5.
TIMER BUTTON: Press the button to scroll upward through quantities of time for
the heater to run before automatically shutting off. The times available are :30,
1:00, 1:30, 2:00, 2:30, 3:00, 3:30, 4:00, 4:30, 5:00, 5:30, 6:00, 6:30, 7:00, 7:30, 8:00,
8:30, 9:00. (The heater must first be powered ON for timer to work)
TEMPERATURE BUTTON: Press button to scroll upward through temperatures to
set the heater thermostat. Available temperatures settings are 65, 70, 75, 80
and 85 F. The thermostat will shut off the heater when it reaches the tempera-
ture you have set. The thermostat will switch the heater on when it drops 3º
Fahrenheit below your set temperature. Hold the button down for 4 seconds
to toggle between Fahrenheit and Celsius.
DOWN LIGHT BUTTON: Press this button to power the LED down lights on, press it
again to power them off. (This feature is only on models with a 5-Button control
panel and remote control)
To use the remote control first re-
move the plastic tab labeled
"REMOVE BEFORE USE" by
Gently pulling.
REMOVE BEFORE USE
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
BATTERY FOR REMOTE
To change the battery, turn the remote control
over. Squeeze the catch toward the center,
then pull to slide the battery tray out.
BACK OF REMOTE
SQUEEZE
THE
CATCH
BATTERY TYPE
CR-2025 3V
7