CompeGPS TwoNav Sportiva Guia Rápido página 3

Mounting
All manuals and user guides at all-guides.com
• Device cradle
• ANT+™ accessories (just TwoNav Sportiva+/Sportiva2+)
Your TwoNav Sportiva+/Sportiva2+ is ANT+™ certified and
compatible with ANT+™ heart rate monitors, bike cadence
sensors, bike speed sensors and bike speed/cadence combo
sensors. Visit the ANT+™ product directory at www.thisisant.com
for a list of compatible products. Once the sensors are mounted
on your bike, follow these steps to start paring information:
1. Open 'Data page' ('Page' key).
2. Make a long press on the data field that you want to
activate (heart rate sensor, cadence sensor or speed
sensor).
3. Select 'Enable HR / Cad / SpS'. TwoNav Sportiva+/
Sportiva2+ starts looking for the sensor signal. If it is
available, it will be displayed. Data is also stored for
each recorded track point.
Note: Use water, ECG gel or other conductive liquids to moisten
the conductive rubber contact, do not use vaseline or oils,
they may insulate the transmitter making it unable to detect
the heart rate signals. Do not bend or stretch the transmitter
and keep it out of extreme cold and heat. Clean and dry the
transmitter carefully after use, do not store wet.
Recharging
You can recharge the battery of the GPS device by connecting the
device to the USB charger included in the product box. Battery
life can be increased by reducing the level of screen backlight
or by turning the screen off when not in use (configuring the
automatic shutdown screen function or by activating the standby