Using The Steam Mop - Shark S6002EU Manual Del Usuario

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
DIRT GRIP PADS
ATTACHING THE PADS
1. Place the Dirt Grip pads flat on the floor with the plastic
rings facing up.
2. Hold the nozzle over the pads. Align the indentation
on the nozzle's rotating discs with the plastic rings on
the pads.
3. Gently lower the nozzle on to the pads, pressing until
the pads are secured.
REMOVING THE PADS
When the pads have cooled completely, remove them
by gently pulling them off the discs.
For questions or to register your product, contact us at: +44 (0800) 862 0453 or visit us online at sharkclean.eu

USING THE STEAM MOP

1. Twist the quick-release cord holder to unwrap the power
cord completely, and plug the cord into an electrical outlet.
The steam mop power light will illuminate.
2. Press the mode button once for NORMAL or twice for
DEEP.
3. Mop with a forward and backward motion.
4. When finished mopping, press the mode button and the
blue indicator lights will blink, indicating that the unit is in
Standby Mode, and the rotating discs will stop spinning.
When the mop is in Standby mode, lift the handle to bring
the Steam Mop back to the upright position and unplug
the cord.
1.
3.
2.
4.