Fullwat PDA500SS Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Appendix:
PX series monitoring platform instructions
1. Software installation:
Download files from Carspa official website on location www.fullwat.com:
PX Monitoring System V1.1.exe,
As below:
Double click
install, enter the interface as follows:
Fill in the user name and company
name, click "Next" to enter following,
2. RS485 Isolated converter driver installation
(This step can be ignored if it has already installed):
If it is a converter with our company, please go to our
website to download, Or, find the following figure from
RS485 isolation converte: CDM21224_Setup.exe file,
double click to install.
3. Login monitoring platform:
After confirming that product is connected to the RS485
isolation converter and PC, click: Start - All Programs - PX
Monitoring System V1.1, the interface is as follows:
After startup, login monitoring interface is as follows:
to
Click "Next" to enter following picture.
Click "Change..." to confirm the installation
path which is recommended to default.
Then the following interface will appear.
Click "Next" until installation is completed
- 16 -
Double click "°" to install, enter the
interface as follows:
Select the serial port number "ComNum" corresponding
to the RS485 converter, click to open the serial port button
"OpenCom", exit the system, click "Exit" or the upper right
corner "X", the operation monitoring data interface is as
shown below:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pda700ssPda1200ssPda2000ss

Tabla de contenido