METRICA 61345 Manual De Instrucciones página 7

POWER SUPPLY
The device works with:
• 4 rechargeable NiMH C-cell batteries located on the bottom of
the unit. Comes with the charger.
FEATURES
Horizontal plane: Place the instrument on a floor, tripod, or wall
mount. The self-leveling range is ± 5 °.
Vertical plane: Place the device on the flat side, the self-leveling
range is ± 5 °.
• Press the (A) button to turn on the unit.
If the SYMBOL
flashes on the digital display, the bat-
tery level is not sufficient. Recharge or replace the batteries.
• When turned on, the device is set to automatic mode.
The laser will flash until self-leveling. Thereafter, the laser will
turn at 600 rpm.
If the device is not in the self-leveling range (± 5 °), the laser
beam and the LED flash. Then place the unit at a level allowing
self-leveling (± 5 °).
ADJUSTMENT OF SPEED
To change the speed, press the button (D):
• Once: the beam is set to 0 rpm
• Twice: the beam rotates at 60 rpm
• Three times: the beam rotates at 120 rpm
• Four times: the beam rotates at 300 rpm
• Five times: the beam rotates at 600 rpm
• To rotate the point, fixed laser, press the (E or F) buttons gra-
dually.
SCANNER FUNCTION
To access the scanner function, press the (C) key.
By pressing successively, the beam is projected with a width of
10 °, 45 °, 90 ° and 180 °.
To rotate the laser beam gradually, press the (E or F) buttons.
TILT FUNCTION TO SIGNAL ACCIDENTAL MOVEMENTS OF
THE DEVICE
To activate the TILT function, the device must be self-leveling.
Press the key (B). The symbol
• If the laser instrument is accidentally moved, the laser beam
stops rotating and flashes.
• To reactivate the rotation, turn off the instrument and restart.
The TILT function will be disabled.
SLOPE FUNCTION (TO ADJUST THE INCLINATION)
Automatic:
THE TILT FUNCTION MUST BE DISABLED
Once the auto-leveling and rotating radius function has started:
• Press the CAL key (H)
• X and Y appear on the display and "X" flashes on the display
• Press the "+" and "-" buttons to adjust the percentage of the
lights up on the digital display.