Installation - universalblue UCSB90201-21 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. INSTALLATION

The heater shall be installed and used according to the safe
standard.
To avoid all dangers, follow the safety instructions.
The installation must be done by the service agent or similarly
qualified persons in order to avoid a hazard.
Important! Make sure that there are no electric cables or
other installations (for example water pipes) near the drill holes.
Make sure that the appliance is securely and vertically fitted to the
wall.
Get two holes on the wall 2 m above the floor and near the corner
more 25 mm, be sure to make the diameter just as same as the
expanding pipe. Fix two screws on the expanding pipe, keep the tips
of the screws out for 10mm, and hang up the machine after the
screws are fixed enough.
325
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ucsb90202-21

Tabla de contenido