Descargar Imprimir esta página

Rotary Hammer Safety Warnings - Makita HR3000C Manual De Instrucciones

Ocultar thumbs Ver también para HR3000C:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
ENGLISH
(Original instructions)
1
Switch trigger
2
Adjusting dial
3
Change lever
4
Shift lever
5
Lock button
6
"Rotation with hammering"
symbol
7
Pointer
8
"Rotation only" symbol
9
"Hammering only" symbol
10 Hammering only
11 Rotation only
12 Rotation with hammering
SPECIFICATIONS
Model
Capacities
Concrete .............................................................30 mm
Core bit ...............................................................90 mm
Steel ...................................................................13 mm
Wood ..................................................................30 mm
-1
No load speed (min
) ...................................... 360 – 720
Blows per minute ........................................ 1,650 – 3,300
Overall length ......................................................391 mm
Net weight ..............................................................5.1 kg
Safety class .............................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.

ROTARY HAMMER SAFETY WARNINGS

1.
Wear ear protectors. Exposure to noise can cause
hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
6
All manuals and user guides at all-guides.com
Explanation of general view
13 Power-ON indicator lamp
(green)
14 Service indicator lamp (red)
15 Side grip
16 Bit shank
17 Bit grease
18 Bit
19 Chuck cover
20 O symbol
21 Depth gauge
22 Clamp screw
23 Grip base
24 Dust cup
25 Blow-out bulb
3.
HR3000C
4.
5.
/II
6.
7.
ENE043-1
8.
ENF002-1
9.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
12. Do not point the tool at any one in the area when
13. Do not touch the bit or parts close to the bit
GEA010-1
14. Some material contains chemicals which may be
SAVE THESE INSTRUCTIONS.
GEB007-7
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
26 Drill chuck assembly
27 Commutator
28 Insulating tip
29 Carbon brush
30 Screwdriver
31 Brush holder cover
32 Brush holder cap
33 Screws
34 Connector
35 Crank cap
36 Hex wrench
37 Hammer grease
38 Black
39 White
Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly
recommended that you wear a dust mask and
thickly padded gloves.
Be sure the bit is secured in place before opera-
tion.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
only when hand-held.
operating. The bit could fly out and injure some-
one seriously.
immediately after operation; they may be
extremely hot and could burn your skin.
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.

Publicidad

loading